What are the Main Points and Precautions of Tower Crane Curve Laying?

As a Tower Crane Manufacturer, share with you. When the line of the tower crane track foundation encounters one of the following two situations, it is necessary to lay a curve at one or both ends of the linear track, so that the tower crane can smoothly transfer the lifting construction surface and continue the lifting operation.
Flat Top Tower Crane
(1) The shape of the engineering object is complicated. A straight track must be connected to another track perpendicular or parallel through a curve.
(2) In the construction of residential quarters, the tower crane shall be directly transferred to another new building without disassembly after the completion of one building.
The main factors that affect the radius of the bend are: the track gauge and wheelbase of the Top Kit Tower Crane; the construction type of the crane walking chassis (jellyfish walking chassis, gantry chassis with hinged legs, and cross-shaped walking chassis) Frame or X-type walking chassis>; the structure of the walking trolley (whether the trolley can rotate around the vertical axis, the width of the tread of the walking rim rolling) and the active trolley is arranged inside or outside the bend.
The difficulty in laying bends is to process curved rails with a radius of curvature that meets the requirements. One is the use of tires by heating and bending the rail. The other is the cold working method, which uses a hydraulic rail bender as a tool to apply top pressure to the straight rail point by point, thereby bending into a curved rail with a radius of curvature that meets the requirements. At present, the simplest and easiest method is the inverted chain bending method. The key points of its process are:
(1) Bending and forming at the construction site, cooperate with the tower crane, while bending and forming, laying and fixing.
(2) The tool is simple, just need some wire rope, snap ring and cable clamp, two anchor piles and a 2t chain.
(3) Check the curvature radius of the curved rail in sections with a wooden curved rail model to ensure the quality of the curved rail.
(4) Sectional construction, each bending length is 500-600mm, and as the bending is fixed, the tower crane will gradually turn from a straight rail to a curved road.
Pay attention to the following points when laying bends:
(1) The spacing of the sleepers on the outside of the bend should be smaller than the spacing of sleepers on the straight section, and the amount of outer sleepers in the curved section should be double the amount of inner sleepers.
(2) Appropriately increase the channel steel braces between the inner and outer rails to ensure the track spacing at the bend.
(3) The height difference between the top surface of the inner and outer rails at the bend should not be greater than 1/1000 gauge.
(4) The steel rail must be fixed firmly with road studs.
(5) The curving section should be covered with ballast. The ballast at the outer rail sleepers should be paved and enclosed with brick masonry.
(6) The radius of curvature of the curve should be selected according to the characteristics of the engineering object.
Our company also has Flat Top Tower Crane for sale, please contact us.

评论

发表评论

此博客中的热门博文

Crane History

图片
As a  Luffing Tower Crane Supplier , let's share with you the history of the crane. In 10 BC, the ancient Roman architect Vitruvius described a lifting device in his architectural manual. The machine has a mast with a pulley on the top of the pole, the position of the mast is fixed by the pulling rope, and the cable passing through the pulley is pulled by the winch to lift the heavy object. Some overweight machines can use two masts to form a herringbone shape, moving the lifting object laterally, but the amplitude is small and the operation is very difficult. In the 15th century, Italy invented  Luffing jib Tower Cranes  to solve this problem. The crane has a sloping cantilever with a pulley on the top of the arm that can be lifted and rotated. However, until the 18th century, all kinds of lifting appliances used by human beings were powered by human and animal power, and they were limited in terms of lifting the weight, the scope of use and work efficiency. In th...
阅读全文

Introduction to Top Kit Tower Crane

图片
Topless Tower Crane is the most commonly used lifting equipment on construction sites. It is used for the construction of steel bars, rafts, concrete, steel pipes, etc. in a section of the  Tower Crane Mast Section . Raw materials. Tower cranes are essential equipment on the construction site. As a  Tower Crane Spare Parts Factory , let's give you a detailed explanation. Top Kit Tower Crane The function of the Topless Tower Crane is to withstand the upper load from the boom puller and the balance arm drawstring and transmit it to the tower structure directly through the turntable through the structural components of the swing tower, turntable, and seat. The top of the self-lifting tower has a truncated cone type, a forwardly inclined or a backward inclined truncated cone type, a herringbone type, and a diagonal bracket type. All the upper slewing tower cranes need to be balanced, and their function is to support the balance weight, which is used to form the balance mo...
阅读全文

Do you know the Regulation of Tower Crane Lifting Height?

图片
As a  10 T Top kit Tower Crane Wholesale , share with you. Lifting height is also called hook height, which is the vertical distance from the concrete foundation surface of the tower crane (or the top surface of the walking track) to the hook. For trolley cranes, the maximum lifting height is immutable. For pitch cranes, the lifting height varies with different amplitudes. At the minimum amplitude, the lifting height can be several dozens higher than the tower tip meters, so the tower crane with pitch amplitude has an advantage in lifting height. Top Kit Tower Crane Tower crane lifting height includes two parameters, one is the lifting height when the tower crane is installed at a free height, and the other is the maximum lifting height when the tower crane is attached. The tower crane does not need to be attached when the free height is installed. The general tower crane It can reach 40 meters, which can meet the needs of buildings below small high-rises. In order to pr...
阅读全文