TW Hoist Goes To Bauma CTT Russia!



Our company specializes in providing Luffing Tower Crane. If you would like more information, please visit our website or contact us.

评论

发表评论

此博客中的热门博文

What should I pay attention to when managing Flat Top Tower Crane accessories?

图片
As a  Tower Crane Manufacturer , share some knowledge. Tower crane is the most commonly used lifting equipment on construction sites. It is also called “tower crane”. It is used for the construction of steel bars, rafts, concrete, steel pipes, etc. Raw materials. Tower cranes are essential equipment on the construction site. From the perspective of the development of the tower crane industry, the industry is highly correlated with the national economy and construction/real estate. Therefore, it is of scientific significance to look at the development of the tower crane industry from the trend of the national economy and the development trend of the real estate industry. Flat Top Tower Crane In order to ensure that the  Flat Top Tower Crane  operation can have emergency reserves, each construction unit often leaves a large number of spare tower crane parts. Therefore, it is also important to manage the tower crane parts safely, improve efficiency and save cost. The ...
阅读全文

What Are The Precautions For The Topless Tower Crane Jacking Process?

图片
Tower Crane Manufacturer  will give you an explanation of the Topless Tower Crane lifting process: 1) When the maximum wind speed of the tower crane is greater than 3~4, it is not allowed to jack up. 2) During the jacking process, the direction of the boom should be the same as that of the standard section, and the hoisting arm should be braked by the slewing brake, and the truck should be parked in the jacking position. 3) If you want to increase the standard section several times in succession, after each section is added, before the standard section of the  Topless Tower Crane  itself, the main chord and the lower support of the tower must have 8 high strengths. Bolted connections, only in this case allow only one nut per bolt. 4) The steps on the standard section must be aligned with the existing standard section. 5) Before the lower support and the tower body are not bolted, the boom swing, the load-carrying trolley and the lifting operation are st...
阅读全文

How to Prevent Corrosion of Tower Cranes after Winter Shutdown?

图片
As a  Heavy Machinery Tower Crane Manufacturers , share with you. For tower cranes that are stopped for 3-5 months, anti-corrosion is an important task. In recent years, the proportion of acid rain components in the sky has increased, which will also adversely affect tower cranes. Before the tower crane is stopped and maintained, the surface paint film of the whole machine should be thoroughly inspected. (1) For the damaged part of the paint film on the metal structure, cleaned the surface of the component and coated it with anti-rust paint and decorative paint film to protect the metal surface from rusting after rain and snow. Luffing Jib Tower Cranes (2) In the movable part of the tower crane, such as the joint of the boom and the tower item, the connecting pin of the sling and the crane, the various guide wheels, trolley wheels, etc., it is necessary to do a good job of rust prevention. We have talked about this problem with many drivers and maintenance personnel who ...
阅读全文