Correct Use and Maintenance of the Reducer

The correct use and maintenance of the Flat Top Tower Crane reducer can not reduce the system noise level and ensure the transmission accuracy, but it can prevent its index degradation and increase the service life. Building Hoist Factory to explain to you.
1. Internal cleaning
The cleaning of the internal parts of the reducer is the basic condition for ensuring its normal operation. Any entry of impurities and dirt will affect and damage the transmission system, resulting in noise.
2. Operating temperature
Ensure the normal working temperature of the reducer, avoid deformation of the parts due to excessive temperature rise, ensure the gears mesh properly, and prevent noise from increasing.


Flat Top Tower Crane
3. Timely lubrication and proper use of oil
Unreasonable lubrication and incorrect use of grease will cause immeasurable damage to the gear unit. At high speeds, the friction of the gear tooth surface will generate a lot of heat energy. If the lubrication is improper, it will cause damage to the gear teeth, affect the accuracy, and the noise will increase. The gear pair is required to have a proper clearance during design. The correct use and selection of lubricating grease can ensure the safe and effective operation of the system, delay the deterioration trend and stabilize the noise level.
4. Proper use of the reducer minimizes damage and damage to components and ensures a stable noise level. The noise of the reducer will increase with the increase of the load, so it should be used within the normal load range.
Our company specializes in providing Topless Tower Crane. If you need it, please feel free to contact us.

评论

发表评论

此博客中的热门博文

Crane History

图片
As a  Luffing Tower Crane Supplier , let's share with you the history of the crane. In 10 BC, the ancient Roman architect Vitruvius described a lifting device in his architectural manual. The machine has a mast with a pulley on the top of the pole, the position of the mast is fixed by the pulling rope, and the cable passing through the pulley is pulled by the winch to lift the heavy object. Some overweight machines can use two masts to form a herringbone shape, moving the lifting object laterally, but the amplitude is small and the operation is very difficult. In the 15th century, Italy invented  Luffing jib Tower Cranes  to solve this problem. The crane has a sloping cantilever with a pulley on the top of the arm that can be lifted and rotated. However, until the 18th century, all kinds of lifting appliances used by human beings were powered by human and animal power, and they were limited in terms of lifting the weight, the scope of use and work efficiency. In th...
阅读全文