6T Topless Tower Crane TCP5510

6T Topless Tower Crane TCP5510
Features1:
Topless or Flat Top Cranes are typified by the lack of a “tip” or the traditional “crane head.” This configuration allows an extensive maneuvering with an overlap of crane arms, flexibility in planning and positioning as well as optimized operation in a site with many cranes. In fact, the Flat Top Tower Crane allows a minimal height difference of approximately 5 meters between the crane’s hook and its top and shortening its arms to 20 meters. When working with cranes in overlap in a working environment, this is a crucial advantage, allowing concentration of as many cranes as possible in the required area, maximizing the efficiency and reaching the optimal product.
The advantages of our Topless Tower Crane are following:
low-cost transport and quick assembly with fewer complete sub-assemblies. The upper crane which has been completely pre-assembled can be installed. The assembly work performed at height is thereby kept to a minimum.Alternatively, the upper crane can also be assembled in individual steps at height – depending on the amount of available space on the construction site or the availability of a large mobile crane.
We can supply 5T Topless Tower Crane, 6T, 8T, 10 T Topless Tower Crane,if you are interested, please contact us immediately.
Features2:
MODEL
TCP5510
MAX LOAD
6T
TIP LOAD
1.0T
JIB LENGTH
55M
FREE STANDING HEIGHT
40.5
MAST SECTION
1.6X1.6X3M

评论

发表评论

此博客中的热门博文

Crane History

图片
As a  Luffing Tower Crane Supplier , let's share with you the history of the crane. In 10 BC, the ancient Roman architect Vitruvius described a lifting device in his architectural manual. The machine has a mast with a pulley on the top of the pole, the position of the mast is fixed by the pulling rope, and the cable passing through the pulley is pulled by the winch to lift the heavy object. Some overweight machines can use two masts to form a herringbone shape, moving the lifting object laterally, but the amplitude is small and the operation is very difficult. In the 15th century, Italy invented  Luffing jib Tower Cranes  to solve this problem. The crane has a sloping cantilever with a pulley on the top of the arm that can be lifted and rotated. However, until the 18th century, all kinds of lifting appliances used by human beings were powered by human and animal power, and they were limited in terms of lifting the weight, the scope of use and work efficiency. In th...
阅读全文